The Lumen Aqua LED lighting system is the ultimate
Aquarium Lightning system for the future. Lumen Aqua LED
lighting system will change the way Aquarium hobbyists
light up their fish tank in the future. It is designed to replace
Metal Halide and traditional Fluorescent lighting where high intensive
lighting is required.
Until the introduction of LED lights into the aquarium hobby,
Aquarium hobbyists have limited choices of two major forms of
lighting for Fresh water / Marine aquariums; Fluorescent tubes/
power compacts, and metal halides. Fluorescent /Power Compact
lights have been widely used on planted and soft coral type reefs
where lighting needs are low.
Whereas for hard coral reefs keepers
with SPS/LPS type corals, they may have used power consuming metal
halide bulbs because of the high intense light emitted. Many reef
and aquatic plant keepers have supplemented metal halide lighting
with actinic power compact lights for a couple of reasons - to
supply the 20,000k blue light which satisfies the light needs
of symbiotic algae, and to give night moon light effect, for viewing
night creatures.
RTG
Arowana under Normal T 5 lighting ** Colour of fish is not being brought out fully.
RTG
Arowana under LumenAqua LED lighting ** Brighter and 100% brings
out the red colour of this fish!
Today, with the introduction
of the revolution LumaAqua LED lighting system,
things will not be the same again. The possibility of owning the
Ultimate Aquarium lighting at more affordable price is here!!
LumenAqua uses about 40% lesser energy than conventional
400W Metal Halide, and the life span of a LED bulbs is approximately
50,000 hours ( 5 to 10 years base on 12 hour / days ). It will
almost eliminate the need for replacing your light bulb again!!
Traditional lighting source also generate heat which affects the
surface temperature of the aquarium, but with the utilization
of LEDs on the Lumen Aqua system, it greatly reduces the effect
of heat transfer into the water . As such, this has also indirectly
eliminated the need for Chillers or reducing the amount of time
required to kick in to chill the tank which saves even more energy
over traditional lighting methods.
Metal halide lights has always been the lighting choice for many
hard coral reef keepers because of its high light output. Metal
halide bulbs are mainly available in 10000K, 15000K, and 20000K.
(K = Kelvin = which is the color temperature of the light.) The
higher the Kelvin rating the more blue light is the lower more
white.
However,
with the introduction of the Colorcon function
on the Lumen Aqua, it allows user to adjust the lighting to any
color temperature ranging from 2,000K ( Warm white ) to
a 20,000K ( Cool White ) effect which will meet demand
for all corals and Aquatic plants. In additional to color temperature
control, Colorcon is also designed with touch
panel abilities, “ etouch”, for ease
of use. With the use of adjustable RGB LED illuminative lights,
user is also able to adjust the color of their aquarium using
“ etouch” according to the mood and
altering the wavelength to optimize the cultivating condition
of the aquatic life form and to enhance vibrancy of fish color.
All LumenAqua system is
fitted with TRIO lens. TRIO
(Trio-Optical Layers) is a linear filtering system patented
optical filtering system developed by Prodisc. It can reduce
the effects of utilizing multiple LEDs within a lighting system
to output a more linear light source, thus reducing the glaring
effect that causes discomfort to users eyes. It has also helped
in dissipation of heat from the LEDs itself.
TRIO (Tri-Optical Layers)
The first filter
of TRIO system enhances LEDs light sources
and increases the luminance efficiency.
The second layer
of TRIO absorb the light from filter and transform
it into a more linear lightning source for the fish
and corals.
The final stage of the lens reduce
the glare produced by the LEDs creating a softer and
user-comfortable lighting environment.
RRSP
:
SGD $ 1980.00 (3 ft)
SGD $ 1450.00 (2 ft)
USA Design
Why LumenAQUA?
Utilizes high brightness LED, saves energy,
has an extended longevity, outputs low temperature, and, with
the addition of a patent optical layer, can enhance the LED
light and uniformly distribute the light source into the aquarium.
Able to adjust to any color for the entire
spectrum of light to meet the demand of the aquatic life forms.
Meticulously engineered with a thermally
efficient aluminum material and a high rotational fan to remove
any problems formed with overheating issues.
Adjustable RGB LED illuminative lights:
a) Change the color of the aquarium according to the mood of
the user with a specific color
b) Alter the wavelength to optimize the cultivating conditions
of the aquatic life forms
c) Modify the LED to reflect vibrant colors off the fish scales
of fluorescent fish, or arowana, etc.
Traditional light source can affect the
surface temperature of the aquarium, but LumenAQUA utilization
of LEDs has minimal affect due to lack of temperature produced
from the LED light.
Protect the Earth from pollution! The regular
light tube has traces of mercury coated on to its components
and after discarding it, the bulb becomes a harmful pollutant
to the Earth. LumenAQUA uses LEDs as its light source and it
has no trace of mercury anywhere.
Click here if you can't see the Video clip on LumenAqua.
LuemAqua
Products specifications
(3 Feet - 36" ) Brightness: Approximately 2,400 Lux
(Measured distance of 50 cm though a tank full of water) Dimensions: 90 cm (Length) X 20 cm (Width) X
10 cm (Height) Input Power Source: 100 - 240 Volts, 50 - 60
Hz, 2.5 A Adjustable Color Temperature Range: 0 ~ 20,000
K
Power Consumption: 72 Watts (24 LEDs X 3 Watts
/ LED)
Output Power Source: 19 V, 7.89 A Others: etouch ColorCon touch pad [Patent] TRIO
optical thin film [Patent]
(2 Feet - 24" )
Brightness: Approximately ~ 1600 lux ( 50 cm
from the surface to the bottom of the tank.)
Adjustable Color temperature range : 0 to 20,000 K Input power Source: 100 – 240V, 50-60
Hz, 2.5A Power Consumption: 48 Watts (16 LEDs X 3 Watts / LED) Output power source: 19V, 7.89A
** LumenAqua is currently available for a standard 2 Feet & 3
Feet aquarium tank.
** Customizable sizes is also available for bulk order, please contact us for more information.
Click here to download Lumen Aqua Manual. Click here to
download Lumen Aqua Specifications
